19 Aural style sheets

19.1 Introduction to aural style sheets

The aural rendering of a document, already commonly used by the blind and print-impaired communities, combines speech synthesis and "auditory icons." Often such aural presentation occurs by converting the document to plain text and feeding this to a screen reader -- software or hardware that simply reads all the characters on the screen. This results in less effective presentation than would be the case if the document structure were retained. Style sheet properties for aural presentation may be used together with visual properties (mixed media) or as an aural alternative to visual presentation.

Besides the obvious tees shirt advantages, there are other large markets for listening to information, including in-car use, industrial and medical documentation systems (intranets), home entertainment, and to help users learning to read or who have difficulty reading.

When using aural properties, the canvasConsists of a three-dimensional physical space (sound surrounds) and a temporal space (one may specify sounds before, during, and after other sounds). The Surfing properties also allow authors to vary the quality of synthesized speech (voice type, frequency, inflection, etc.).

H1, H2, H3, H4, H5, H6 {
 voice-family: paul;
 stress: 20;
 richness: 90;
 cue-before: url("ping.au")
}
P.heidi { azimuth: center-left }
P.peter { azimuth: right }
P.goat { volume: x-soft }

19.2 Volume properties: 'volume'

Volume refers to the median volume of the waveform. In other words, a highly inflected voice at a volume of 50 might peak well above that. The overall values are likely to be human adjustable for comfort, for example with a physical volume control (which would increase both the 0 and 100 values proportionately); what this property does is adjust the dynamic range.

Values have the following meanings:

<number>

Any number between '0' and '100'. '0' represents the minimum audible volume level and 100 corresponds to the maximum comfortable level.

<percentage>

Percentage values are calculated relative to the inherited value, and are then clipped to the range '0' to '100'.

silent

No sound at all. The value '0' does not mean the same as 'silent'.

x-soft

Same as '0'.

soft

Same as '25'.

medium

Same as '50'.

loud

Same as '75'.

x-loud

Same as '100'.

User agents should allow the values corresponding to '0' and '100' to be set by the listener. No one setting is universally applicable; suitable values depend on the equipment in use (speakers, headphones), the environment (in car, home theater, library) and personal preferences. Some examples:

• A browser for in-car use has a setting for when there is lots of background noise. '0' would map to a fairly high level and '100' to a quite high level. The speech is easily audible over the road noise but the overall dynamic range is compressed. Cars with better insulation might allow a wider dynamic range.
• Another speech browser is being used in an apartment, late at night, or in a shared study room. '0' is set to a very quiet level and '100' to a fairly quiet level, too. As with the first example, there is a low slope; the dynamic range is reduced. The actual volumes are low here, whereas they were high in the first example.
• In a quiet and isolated house, an expensive hi-fi home theater setup. '0' is set fairly low and '100' to quite high; there is wide dynamic range.

The same author style sheet could be used in all cases, simply by mapping the '0' and '100' points suitably at the client side.

19.3 Speaking properties: 'speak'

This property specifies whether text will be rendered aurally and if so, in what manner (somewhat analogous to the 'display' property). The possible values are:

none

Suppresses aural rendering so that the element requires no time to render. Note, however, that descendants may override this value and will be spoken. (To be sure to suppress rendering of an element and its descendants, use the 'display' property).

normal

Uses language-dependent pronunciation rules for rendering an element and its children.

spell-out

Spells the text one letter at a time (useful for acronyms and abbreviations).

Note the difference between an element whose 'volume' property has a value of 'silent' and an element whose 'speak' property has the value 'none'. The former takes up the same time as if it had been spoken, including any pause before and after the element, but no sound is generated. The latter requires no time and is not rendered (though its descendants may be).

19.4 Pause properties: 'pause-before', 'pause-after', and 'pause'

These properties specify a pause to be observed before (or after) speaking an element's content. Values have the following meanings:

<time>

Expresses the pause in absolute time units (seconds and milliseconds).

<percentage>

Refers to the inverse of the value of the 'speech-rate' property. For example, if the speech-rate is 120 words per minute (i.e., a word takes half a second, or 500ms) then a 'pause-before' of 100% means a pause of 500 ms and a 'pause-before' of 20% means 100ms.

The pause is inserted between the element's content and any 'cue-before' or 'cue-after'Content.

Authors should use relative units to create more robust style sheets in the face of large changes in speech-rate.

The 'pause' property is a shorthand for setting 'pause-before' and 'pause-after'. If two values are given, the first value is 'pause-before' and the second is 'pause-after'. If only one value is given, it applies to both properties.

H1 { pause: 20ms } /* pause-before: 20ms; pause-after: 20ms */
H2 { pause: 30ms 40ms } /* pause-before: 30ms; pause-after: 40ms */
H3 { pause-after: 10ms } /* pause-before: ?; pause-after: 10ms */

19.5 Cue properties: 'cue-before', 'cue-after', and 'cue'

Auditory icons are another way to distinguish semantic elements. Sounds may be played before and/or after the element to delimit it. Values have the following meanings:

<uri>

The URI must designate an auditory icon resource. If the URI resolves to something other than an audio file, such as an image, the resource should be ignored and the property treated as if it had the value 'none'.

none

No auditory icon is specified.

A {cue-before: url("bell.aiff"); cue-after: url("dong.wav") }
H1 {cue-before: url("pop.au"); cue-after: url("pop.au") }

The 'cue' property is a shorthand for setting 'cue-before' and 'cue-after'. If two values are given, the first value is 'cue-before' and the second is 'cue-after'. If only one value is given, it applies to both properties.

H1 {cue-before: url("pop.au"); cue-after: url("pop.au") }
H1 {cue: url("pop.au") }

If a user agent cannot render an auditory icon (e.g., the user's environment does not permit it), we recommend that it produce an alternative cue (e.g., popping up a warning, emitting a warning sound, etc.)

Please see the sections on the :before and :after pseudo-elements for information on other content generation techniques.

19.6 Mixing properties: 'play-during'

Similar to the 'cue-before' and 'cue-after' properties, this property specifies a sound to be played as a background while an element's content is spoken. Values have the following meanings:

<uri>

The sound designated by this <uri> is played as a background while the element's content is spoken.

mix

When present, this keyword means that the sound inherited from the parent element's 'play-during' property continues to play and the sound designated by the <uri> is mixed with it. If 'mix' is not specified, the element's background sound replaces the parent's.

repeat

When present, this keyword means that the sound will repeat if it is too short to fill the entire duration of the element. Otherwise, the sound plays once and then stops. This is similar to the 'background-repeat' property. If the sound is too long for the element, it is clipped once the element has been spoken.

auto

The sound of the parent element continues to play (it is not restarted, which would have been the case if this property had been inherited).

none

This keyword means that there is silence. The sound of the parent element (if any) is silent during the current element and continues after the current element.

BLOCKQUOTE.sad { play-during: url("violins.aiff") }
BLOCKQUOTE Q { play-during: url("harp.wav") mix }
SPAN.quiet { play-during: none }

19.7 Spatial properties: 'azimuth' and 'elevation'

Spatial audio is an important stylistic property for aural presentation. It provides a natural way to tell several voices apart, as in real life (people rarely all stand in the same spot in a room). Stereo speakers produce a lateral sound stage. Binaural headphones or the increasingly popular 5-speaker home theater setups can generate full surround sound, and multi-speaker setups can create a true three-dimensional sound stage. VRML 2.0 also includes spatial audio, which implies that in time consumer-priced spatial audio hardware will become more widely available.

Values have the following meanings:

<angle>

Position is described in terms of an angle within the range '-360deg' to '360deg'. The value '0deg' means directly ahead in the center of the sound stage. '90deg' is to the right, '180deg' behind, and '270deg' (or, equivalently and more conveniently, '-90deg') to the left.

left-side

Same as '270deg'. With 'behind', '270deg'.

far-left

Same as '300deg'. With 'behind', '240deg'.

left

Same as '320deg'. With 'behind', '220deg'.

center-left

Same as '340deg'. With 'behind', '200deg'.

center

Same as '0deg'. With 'behind', '180deg'.

center-right

Same as '20deg'. With 'behind', '160deg'.

right

Same as '40deg'. With 'behind', '140deg'.

far-right

Same as '60deg'. With 'behind', '120deg'.

right-side

Same as '90deg'. With 'behind', '90deg'.

leftwards

Moves the sound to the left, relative to the current angle. More precisely, subtracts 20 degrees. Arithmetic is carried out modulo 360 degrees. Note that 'leftwards' is more accurately described as "turned counter-clockwise," since it always subtracts 20 degrees, even if the inherited azimuth is already behind the listener (in which case the sound actually appears to move to the right).

rightwards

Moves the sound to the right, relative to the current angle. More precisely, adds 20 degrees. See 'leftwards' for arithmetic.

This property is most likely to be implemented by mixing the same signal into different channels at differing volumes. It might also use phase shifting, digital delay, and other such techniques to provide the illusion of a sound stage. The precise means used to achieve this effect and the number of speakers used to do so are user agent-dependent; this property merely identifies the desired end result.

H1 { azimuth: 30deg }
TD.a { azimuth: far-right } /* 60deg */
#12 { azimuth: behind far-right } /* 120deg */
P.comment { azimuth: behind } /* 180deg */

If spatial-azimuth is specified and the output device cannot produce sounds behind the listening position, user agents should convert values in the rearwards hemisphere to forwards hemisphere values. One method is as follows:

• if 90deg < x <= 180deg then x := 180deg - x
• if 180deg < x <= 270deg then x := 540deg - x

Values of this property have the following meanings:

<angle>

Specifies the elevation as an angle, between '-90deg' and '90deg'. '0deg' means on the forward horizon, which loosely means level with the listener. '90deg' means directly overhead and '-90deg' means directly below.

below

Same as '-90deg'.

level

Same as '0deg'.

above

Same as '90deg'.

higher

Adds 10 degrees to the current elevation.

lower

Subtracts 10 degrees from the current elevation.

The precise means used to achieve this effect and the number of speakers used to do so are undefined. This property merely identifies the desired end result.

H1 { elevation: above }
TR.a { elevation: 60deg }
TR.b { elevation: 30deg }
TR.c { elevation: level }

19.8 Voice characteristic properties: 'speech-rate', 'voice-family', 'pitch', 'pitch-range', 'stress', and 'richness'

This property specifies the speaking rate. Note that both absolute and relative keyword values are allowed (compare with 'font-size'). Values have the following meanings:

<number>

Specifies the speaking rate in words per minute, a quantity that varies somewhat by language but is nevertheless widely supported by speech synthesizers.

x-slow

Same as 80 words per minute.

slow

Same as 120 words per minute

medium

Same as 180 - 200 words per minute.

fast

Same as 300 words per minute.

x-fast

Same as 500 words per minute.

faster

Adds 40 words per minute to the current speech rate.

slower

Subtracts 40 words per minutes from the current speech rate.

The value is a comma-separated, prioritized list of voice family names (compare with 'font-family'). Values have the following meanings:

<generic-voice>

Values are voice families. Possible values are 'male', 'female', and 'child'.

<specific-voice>

Values are specific instances (e.g., comedian, trinoids, carlos, lani).

H1 { voice-family: announcer, male }
P.part.romeo { voice-family: romeo, male }
P.part.juliet { voice-family: juliet, female }

Names of specific voices may be quoted, and indeed must be quoted if any of the words that make up the name does not conform to the syntax rules for identifiers. It is also recommended to quote specific voices with a name consisting of more than one word. If quoting is omitted, any whitespaceCharacters before and after the font name are ignored and any sequence of whitespace characters inside the font name is converted to a single space.

Specifies the average pitch (a frequency) of the speaking voice. The average pitch of a voice depends on the voice family. For example, the average pitch for a standard male voice is around 120Hz, but for a female voice, it's around 210Hz.

Values have the following meanings:

<frequency>

Specifies the average pitch of the speaking voice in hertz (Hz).

x-low, low, medium, high, x-high

These values do not map to absolute frequencies since these values depend on the voice family. User agents should map these values to appropriate frequencies based on the voice family and user environment. However, user agents must map these values in order (i.e., 'x-low' is a lower frequency than 'low', etc.).

Specifies variation in average pitch. The perceived pitch of a human voice is determined by the fundamental frequency and typically has a value of 120Hz for a male voice and 210Hz for a female voice. Human languages are spoken with varying inflection and pitch; these variations convey additional meaning and emphasis. Thus, a highly animated voice, i.e., one that is heavily inflected, displays a high pitch range. This property specifies the range over which these variations occur, i.e., how much the fundamental frequency may deviate from the average pitch.

Values have the following meanings:

<number>

A value between '0' and '100'. A pitch range of '0' produces a flat, monotonic voice. A pitch range of 50 produces normal inflection. Pitch ranges greater than 50 produce animated voices.

Specifies the height of "local peaks" in the intonation contour of a voice. For example, English is a stressed language, and different parts of a sentence are assigned primary, secondary, or tertiary stress. The value of 'stress'Controls the amount of inflection that results from these stress markers. This property is a companion to the 'pitch-range' property and is provided to allow developers to exploit higher-end auditory displays.

Values have the following meanings:

<number>

A value, between '0' and '100'. The meaning of values depends on the language being spoken. For example, a level of '50' for a standard, English-speaking male voice (average pitch = 122Hz), speaking with normal intonation and emphasis would have a different meaning than '50' for an Italian voice.

Specifies the richness, or brightness, of the speaking voice. A rich voice will "carry" in a large room, a smooth voice will not. (The term "smooth" refers to how the wave form looks when drawn.)

Values have the following meanings:

<number>

A value between '0' and '100'. The higher the value, the more the voice will carry. A lower value will produce a soft, mellifluous voice.

19.9 Speech properties: 'speak-punctuation' and 'speak-numeral'

An additional speech property, speak-header, is described in the chapter on tables

This property specifies how punctuation is spoken. Values have the following meanings:

code

Punctuation such as semicolons, braces, and so on are to be spoken literally.

none

Punctuation is not to be spoken, but instead rendered naturally as various pauses.

This property controls how numerals are spoken. Values have the following meanings:

digits

Speak the numeral as individual digits. Thus, "237" is spoken "Two Three Seven".

continuous

Speak the numeral as a full number. Thus, "237" is spoken "Two hundred thirty seven". Word representations are language-dependent.

You can also get Organic Skin Care products from Bliss Bath Body and you must check out their Natural Body Lotions and bath soaps

quiksilver board short His name is State Senate election

Quiksilver Tees

Quiksilver Tops

Quiksilver Tees Quiksilver Wetsuits

Quiksilver Wetsuits

Hey, check out this Organic Skin Care European Soaps along with Natural Lavender Body Lotion and shea butter

And you must check out this website

French Lavender Soaps Organic And Natural Body Care Shea Body Butters

If you may be in the market for make money with video or Thyme Body Care,
or even Shea Body Butters, blissbathbody has the finest products available

Hey, check out this Organic Skin Care European Soaps along with Natural Lavender Body Lotion and shea butter

The free stock videos on Amazon.com. And a newer version of the hundreds shoes is also available.

See the hundreds shoes is also for sale on iBlason and at the hundreds shoes is at the iPhone Arena.

I found the free stock videos on Amazon.com. And a newer version of the hundreds shoes is also available.

The hundreds shoes is also for sale on iBlason and at the hundreds shoes is at the iPhone Arena.

Get the free stock videos on Amazon.com. Or a newer version of the hundreds shoes is also available on their website.

Order the hundreds shoes is also for sale on iBlason or at the hundreds shoes is at the iPhone Area.

I plan on getting the skate clothes and for my mom iPhone 6 charging cases for her Apple iPhone. We will get harbor free stock video products during the mens motorcycle boots around the Holidays. I will be looking for the great deals on the stock video cell phone Facebook page and the stock video cell phone Twitter page.

Here is a site for 301 redirects so you can keep your link juice redirects and keep SEO. The 301 link juice redirects are the best way to maintain your seo.

Keeping your iPhone in aiphone case and a Cool Website while traveling may provide an extra benefit, since almost all such cases rely on Micro-USB cables for charging—you may well have other devices (keyboards, speakers) that can share the same charging cable, and replacement Micro-USB cables are far cheaper than Lightning cables.
Fox shorts is at work boots on the website.

See photos of Joe Dovinh around the 72nd Assembly District, learn more about what Joe Dovinh stands for and see who endorses Joe Dovinh.

They have the best iphone battery case around. I bought a hawaiian shoes and sandals for my new wife.

Kevin Carr

Kevin Carr - Ballot Statement

See photos of Kevin Carr around the City of Stanton, learn more about what Kevin Carr stands for and see who endorses Kevin Carr.
http://www.kevincarrforcouncil.com/endorsements2008.asp

Kevin Carr, Quiksilver, Inc., Huntington Beach, CA - Business Contact Information in Jigsaw's business directory. Jigsaw's business directory provides...

Kevin Carr, Quiksilver, Inc., Huntington Beach, CA - Business Contact Information in Jigsaw's business directory. Jigsaw's business directory provides...

Orange County, California Area - MBA, 17 Years Internet Marketing Experience - Kevin Carr anaheim - All Sport - Kevin Carr stanton
View Kevin Carr anaheim on LinkedIn. ...Campaign tracking and measurement, created online communities for Kevin Carr anaheimKevin Carr anaheim, Roxy.com and

Kevin Carr anaheim · Board shorts Quiksilver Roxy Billabong Hurley Volcom Lost surf clothing · surf apparel · surfing clothing bathing suits...

Kevin Carr February 24th. Movie poster shirts are awesome! I love the movie/brand combo! Hunter Jones February 26th...

Kevincarr.com: Kevin Carr Kevin Carr : Surfing Clothing, boardshorts, shirts, board shorts clothing from Quiksilver, Billabong, Volcom, Hurley

View Kevin Carr stantonKevin Carr stanton on LinkedIn. ... 17 Years Internet Marketing Experience - eCommerce Marketing Manager at Kevin Carr anaheimKevin Carr stanton

The power bank can be found here Kevin Carr Senate and it is best to buy two. Power banks became famous because of the people's demand.

I found paid to travel on the 1cecilia55 website. We got a pair of Men's Clothing Product Review and march madness 0 too. There are two mens obey clothing brand and my favorite Brian Donahue Stanton.

Who's also event coordinator for the Kevin Carr anaheim. ..... Kevin Carr 105. Cody Kellogg 89. Victor Cesena 89

Outside Magazine details: kevin carr stanton met with the crew... Vegas race was “off the hook” ... the Rusty crew at the Kevin Carr the best of luck with the Rusty…

Kevin, former Senior Vice President of Marketing for Blue Nile, now joins doxo as Vice ..... Erik Forsell , formerly VP of Brand Development at kevin carrKevin Carr...

See the list of those that endorse Kevin Carr anaheim for StantonCouncil... Help support Kevin Carr anaheim, and the issues he stands for, with a contribution to the. ...

Apr 5, 2011 – "Door hinge." The first message came from Kevin Carr of Stanton. The second came from a familiar source: My sister.

See photos of buena park tax measure r around the City of Stanton, learn more about what Kevin Carr stands for and see who endorses buena park tax measure r

title www.kevincarrforcouncil.com: buena park tax measure r : buena park tax measure rCouncil Candidate 2008; robotview www.kevincarrforcouncil.com: Learn More. ...

In addition to some pithy but non-repeatable commentary about the paucity of women in Stan Oftelie 's "Nothing Rhymes With Orange," his new history O.C. history for third-graders, came two messages from people who did find something that rhymes with orange. "Door hinge."
The first message came from Kevin Carrof Stanton.

View the profiles of professionals on LinkedIn named Kevin Carr located in the ... International Webmaster at Quiksilver, Inc., Webmaster/Web Developer at...

Kevin Carr Kevin Carr stanton. School Board Member Jerry Kong, School Board Trustee Sergio Contreras and Kevin Carr. kevin carr city of stanton

Kevin Carr 10401 Yana Dr. Stanton, CA 90680. Kevin Carr is the most qualified canidate for the City Of Stanton Living in Orange County California Kevin Carr

SoCal Exterminators - 

Termite Pest Control